50 Leather Street, Breakwater, Geelong Vic

(03) 5248 8373

Tank Fittings

Paton stock a full range of tank fittings accessories to suit your every need. But please remember your new Paton Tank comes standard with a 1“ ball valve tap, tank flange, inlet strainer and overflow.

Items we stock, include:

Choosing the right Fitting

For a small domestic household tank a 1” outlet fitting should be sufficient for use with a garden hose or pump. It is important that you receive advice from your plumber for the correct choice.

Tank Flange

This is required to thread a ball valve or gate into for your water outlet. Also is used to join multiple tanks together with an equaliser pipe or maintenance outlet with a bung.

Sizes: 3/4″, 1″, 1 1/4″, 1 1/2″, 2″

five inch tank flanges

Tank Boss

This tank boss is designed for commercial tanks and industrial situations. It comes in 2 halves with 2 gaskets.

Sizes: 3″, 4″ and 6″

tank boss is designed for commercial tanks and industrial situations

1″ Ball Valve Tap

This is the standard fitting on a Paton Tank with a chrome ball valve and BSP thread connection which will fit any domestic garden hose fitting.

1

Lockable Ball Valve Tap

This ball valve tap also has the domestic hose connection as well as a lockable lever system to stop any unauthorised access to your tank water.

Lockable Ball Valve Tap

Ball Valve Tap

Chrome ball valve tap, for quick and easy water flow.

Sizes: 3/4″, 1″, 1 1/4″, 1 1/2″, 2″ and 2 1/2″
( 2″ valve with 2 ½” brass adaptor is used with the CFA fittings).

Ball Valve Tap

CFA Fitting

Consisting of a  2” ball valve and tank flange then fitted with a Victorian CFA approved brass fire hose adaptor. Allows CFA crews direct connection with tankers.

CFA Fitting

Gate Valve

A traditional brass gate valve with ‘Full Bore’ flow capacity.

Sizes: 1/2″, 1/4″, 1″, 1 1/4″, 1 1/2″, 2″, 2 1/2″ and 4″

Gate Valve

Inlet Strainer

A standard fitting on all Paton Tanks. This will stop leaf litter and most dust particles from entering your tank. Also available with UV Light Guard insert.

Sizes: 300mm, 400mm & 500mm

Inlet Strainer

Moulded Overflow Fitting

This corrugated fitting is angled at a 5 degree fall to stop drips running down the tank wall.

Sizes: 50mm, 75mm, 90mm, 100mm and 150mm (with tank boss).

Moulded Overflow Fitting

High Level Overflow

This is designed to maximise your water storage. Internal overflow pipe is cut 80mm higher than standard model.Giving you 80mm more water capacity.

Sizes: 90mm only

NO IMAGE AVAILABLE

Corrugated Tank Outlets (CTO)

These zinc alloy CTO’s are used when a male thread is required inside of the tank for an inlet i.e ball float valve systems or tank joiner. Also can be fitted on the ‘inner ’ or ‘outer’ curve of a corrugation. These CTO’s are used on all Paton Reservoir Tanks.

Sizes: 1/4″, 1″, 1 1/4″, 1 1/2″, 2″

Corrugated Tank Outlets (CTO)

Can't see what you want? Or want more information?

Request a call back from one of our water tank specialists.

Request a call back